New Drivers Supported:
 Added Crestron Driver (currently for Beta testing only - Windows & iOS)
 Added Lutron Driver (currently for Beta testing only - Windows)

AMX Driver changes
New features:

- AMX security ICSP protocol is supported;
- Auto popup hide is supported;
- Input fields (text input type) are supported;
- Added Keyboard support for entry fields;
- Added password protection to the button action;
- Show/hide status bar (time, battery charge, WiFi status, etc.);
- Sounds are supported;
- Slider name for Bargraph is supported;
- System (port 0) channels: date, time, connection status are supported;
- Added ProgressBar to iRidium Transfer (shows transfering progress);
- Added support for direct weblinks;
- Added "NEWS HEADER" borders;
- Added reset of values of channels with disconnection or sleeping;
- Added “STRING OUTPUT PORT” and “STRING OUTPUT” support;

Supported AMX commands:

@PPA, @PPF, @PPG, @PPK, @PPN, @PPX, PAGE, PPOF, PPOG, PPON,
^ANI, ^BAT, ^BAU, ^BCB, ^BCF, ^BCT, ^BDO, ^BMF, ^BML, ^BMP, ^BOP, ^BOR,
^BRD, ^BSF, ^BWW, ^ENA, ^GDI, ^GIV, ^GLH, ^GLL, ^GSC, ^GSN, ^ICO, ^JSB,
^JSI, ^JST, ^SHO, ^TEC, ^TEF, ^TXT, ^UNI, ^RFR, ^RAF

Fixed Bugs:

- When using the !T command to send a degree (hex B0) to the panel, the text is blanked;
- Incorrect translation of the"|" character (hex 7C) in the a text string;
- Time for 12:24 (around noon) showing as 00:24;
- Incorrect running of the ^BMP command;
- Incorrect operation of the page command, if the page name contains spaces;
- First start up error (settings have been deleted before);
- Could not load popup onto specific page;
- Incorrect action for PASS THROUGH buttons;
- Dynamic images are not displayed properly;
- The button properties: visible and active do not work;
- Problems with multistate objects;

Known issues:

- Variable text ranges are not supported;
- Bargraph “Handle Bar” is not visible;
- Dynamic Images do not work with a FTP resources;
- Word wrap text with more than 2 lines displays only 2 first lines

KNX Driver changes:
New features:
Toggle button type supported
Increment/Decrement button type supported
 more IP interfaces/IP Routers supported
(tested on JUNG IPR REG 100, JUNG IPS REG 100, Siemens 148/22, Siemens 148/21)
- weinzierl BAOS 770, 771, 772 fully supported

HDL Smart-Bus Driver changes
New features:
Z-AUDIO is supported
Toggle button type supported
Increment/Decrement button type supported
 

1. Selection of the network card is added
2. Capability of setting a password for design properties (connection properties)
3. Capability of  selecting ports for Search and Update
4. iOS bar displaying settings are added
5. UDID receipt from Transfer
6. Operation with groups is added
7. Design uploading progress bar synchronized with Client on iOS is added
8. Operation with licenses is changed

1. Support of UNICODE is added
2. UNDO/REDO is added
3. Support of sound-on-buttons is added
4. Multilanguage support is added
5. Multiproject support  (simaltaneous editing of several projects) is added
6. Storage of Editor states (panels position) is added
7. Gallery is updated
8. Saving in a new format: compressed file of IRPZ project is added
9. Bug with Domintell channels is corrected
10. HDL-BUS Pro channel properties are added
11. Workspace ZOOM is added
12. Spread/compression of the items to the object size is added
13. Locking of the size and item position is available
14. Capability to group items is added
15. Accelaration of the graphic engine is changed
16. Shift of an item with pressed CTRL - +10 pix is added
17. Component of failed files deleting from the local gallery is added
18. Editing of the item text in AllStates when pressing F2 is available
19. List of recent projects is added
20. Z-order (capability of displaying objects on different levels) is added
21. Cloning and copying of pages and popups is added
22. Support of LUTRON is added
23. Support of CRESTRON is added
24. Address input for KNX driver is changed
25. Intergration with Transfer is added
26. Properties inspector (copying between the fields, transparency settings are more easy-to-use) is debugged
27. New resolutions for iPhone3, iPhone4, iPad are added
28. Change of the cursor view depending on the mode is added
29. Function of creating an object clone (when holding Shift and dragging the object) is added
30. Setting of intervals between objects is added
31. Make Transparent command (makes the object background transparent) is added
32. Object display in the Tree can be turned off (pages and popups only).
33. AutoHide option for popups (a popup is hidden within a preset time)  is added
34. Video cameras setting is added
35. Project status (saved/not saved) is displayed
36. Support of "hot" keys
37. Tool of fast size change is added
38. Setting of fast effect (shift, translucency) is added

Bug fixed:

  1) Bug of video stream display fixed
       

Updates:

1) Integration of features of two applications - Wizard & Transfer - and creation of a single tool for conversion and project uploading to a target device.

Bug fixed:

1) Bugs of Beta version fixed.   

[Windows] Support of iRidium lists

[Windosw] Video stream zooming

[Windows] Floating-point numbers

[KNX/EIB] + New component added - iRidium Gate

[AMX] -Chameleon images bug fixed
[AMX] -Fonts bug fixed
 

+ Capability of deleting popups groups added
+ Capability of making an image from the gallery as a background added
+ Capability of managing properties of states (ALL STATES) added
- Custom driver is renamed to AV CONTROL
- Gallery filter for file extensions added
- Gallery-based operation error fixed

[AMX] - Chameleon images bug fixed
[ALL] - Video stream bug fixed (If the camcorder access seeks the password, the application closes)
 

[AMX] - Text output bug fixed
[AMX] - Popups bug fixed
[AMX] - PAGE- bug fixed
[ALL] - TimeUp/TimeDown properties bug fixed
 

[Client] - Bug determining the start in a full screen mode fixed
[Install] - Installing fonts bug fixed
[Client] + Command line support added
[Wizard] +Command line support added
 

+ Converter from *. ld2 - Insyte (modbus tcp) added
+ Capability of channel movement inside the list added
+ Emulator mode added
+ Saving of GUI Editor local settings added
+ Converter from *. pr4 - ETS EIB added
 - Shturman D12SS20 error fixed

Updates:
1) [iPhone] + Don't Sleep Mode added

Bug fixed:
1) [iPhone] [Dialog] -Error of channels and buttons sticking is corrected
2) [ALL] [AMX] -Error of the @PPA command is corrected
3) [ALL] [AMX] -Error for receiving the parameters of the @PPN, @PPF, PPON, PPOF commands is corrected
4) [ALL] [AMX] -Error for the operation with the ^TXT, ^UNI commands is corrected: in the process of sending the empty string onto the item the item text was not cleared out
5) [ALL] [AMX] -Error in the BAU, BAT commands is corrected
6) [ALL] [AMX] -Error in the BCT,BCF,BCB commands is corrected
7) [ALL] [AMX] -Error upon receiving the commands from the controller is corrected
8) [ALL] [Modbus] -Error for data receipt for several logic units on the one physical unit is corrected
9) [ALL] [Modbus] -Error on the operation with COIL is corrected
10) [ALL] [Modbus] -Error on the primary data update is corrected
 

Updates and Bug fixed:
All features of iPhone version are included (supported full iPad Resolution - 1024x768 pix)
 

Updates:
1) [windows] [Shturman D12SS20] +Switching of the response wait on the channels not requiring the response (SetChannel, WorkSend, WorkButton)
2) [windows] [Shturman D12SS20] +Modifications of the receipt of the current value onto the set value (WorkUpdate)
3) [windows] [Domintell] +DIM01, DBIR01, DTRV01, DTRP01, DTRP02, DTEM01, DTEM02, DLCD03, DPBTLCD02, DTSCOx, DAMPLI01 devices are completed
4) [windows] [AMX] +Addition of the system number
5) [windows] [X10] +Data forwarding and receipt
6) [windows] [Custom] +Selection of the property on which the value influences
7) [windows] [CustomHTTP] +Selection of the property on which the value influences
8) [windows] +Processing of exceeding the limits of the application window is added
9) [windows] +Replacement of the ID text on the HWID text
Bug fixed:
1) [windows] [AMX] -Error in the JST, JSB, JSI commands is corrected
2) [windows] [AMX] -Error of receiving the image by name is corrected
3) [Windows] [AMX] -Error of level forwarding is corrected
4) [windows] [DialogSystem] -Error of receiving the feedback with the levels is corrected (could be found if the numbers of the channels are identical)
5) [windows] [Modbus] -Parameter of the device identifier is transferred from the drivers' parameters into the channel parameter
6) [windows] [Modbus] -Error of regeneration of the user's value upon data receipt is corrected
7) [windows] [Dialog] -Error of $R,$A display is corrected
 

Updates:
1) [GUI Editor] +Synchronization of the channel selection in the properties with the floating window Channels
2) [GUI Editor] +Progress indicators on the hard operations are added
3) [GUI Editor] +X10 is added
4) [GUI Editor] +Signs to the channels are added
5) [GUI Editor] +Shifts of the positions for the controls group are added
6) [GUI Editor] +Panel with the controllers and channels is added
7) [GUI Editor] +"hot buttons" Ctrl+S, Ctrl+C, Ctrl+V, Ctrl+Insert, Shift+Insert are added
8) [GUI Editor] +Built-in fonts are added
9) [GUI Editor] +Parameter Template is added into the states
10) [GUI Editor] +Control selection/control selection release in the group with the button Ctrl is added
Bug fixed:
11) [GUI Editor] -Channels numeration is corrected
12) [GUI Editor] -Structure of the Modbus TCP, RTU, ASCII channels is redone
13) [GUI Editor] -Domintell support is redone
14) [GUI Editor] -Upon selection of fonts only the truetype fonts are selected
15) [GUI Editor] -Algorithm of the fonts search is changed
16) [GUI Editor] -Size of the user's data in the Custom, Custom HTML, XBMC is changed
17) [GUI Editor] -Data structure for modbus (device number) is adjusted
18) [GUI Editor] -Localization is updated
19) [GUI Editor] -Domintell is adjusted
20) [GUI Editor] -Elements copying is corrected
21) [GUI Editor] -Error with the channels numeration is corrected
22) [GUI Editor] -Channels panel is corrected
23) [GUI Editor] -Shturman D12SS20 is corrected
24) [GUI Editor] -Channels and devices numeration is corrected
25) [GUI Editor] -X10 is corrected
26) [GUI Editor] -Interface improvements
27) [GUI Editor] -Icon is changed
28) [GUI Editor] -Translation is updated
29) [GUI Editor] -Lines downloading and saving is adjusted
30) [GUI Editor] -Multiline text display is adjusted
31) [GUI Editor] -Modbus is adjusted
32) [GUI Editor] -Error with the properties clearance is corrected
33) [GUI Editor] -Window of the project creation is changed
34) [GUI Editor] -Forms headers are updated
35) [GUI Editor] -Warning messages are updated
36) [GUI Editor] -Custom Driver is updated
37) [GUI Editor] -Commands are corrected
38) [GUI Editor] -Upon impossibility to find the font file, the program warns and demands to select the other one
 

Updates:
1) [Wizard] +Replacement of the ID text on the HWID text
2) [Wizard] +Localization addition
3) [Wizard] +Condition of the Fullscreen (Windows platform) parameter activity is added
4) [Wizard] +Condition of the Sound (open project) parameter activity is added
5) [Wizard] [TP4] +Reading of lines and commands
6) [Wizard] [TP4] +Reading of the effect and effect color
Bug fixed:
1) [Wizard] -Error of data extraction from TP4 is corrected
2) [Wizard] -Error for IRR saving on the condition if there is no file is corrected
3) [Wizard] -Downloading of the XCF files is corrected
4) [Wizard] -Error with the receipt of the negative values is corrected
5) [Wizard] -Error with the negative coordinate storage is corrected
 

Updates:
1) [Import][AMX] +Operation with the new AMX channel
2) [Import][Modbus] +Operation with the new Modbus channel
3) [Import] +Processing of field titles regardless of the register is changed
4) [Common] +Copying method with the condition is added
5) [Common] +Copying method of files extension (char) is added
Bug fixed:
1) [Import] -Error with the null fields is corrected
2) [Import][Custom] -Error with the sequence conversion is corrected
3) [Dialog] -Downloading of the negative coordinates is corrected
4) [Prorocol][AMX] -Channel unloading is corrected

Updates:
1) AMX: @PPN, @PPF, @PPX, @PPA, @PPK, @PPG, @CPG, PAGE, PPON, PPOF, PPOG, ^TXT, ^BAT, ^UNI,
^BAU, ^ANI, ^SHO, ^BCB, ^BCF, ^BCT, ^JSB, ^JSI, ^JST, ^ICO, ^BMP, ^BOP, ^ENA commands are added;
2) AMX: Chameleon Image option is added;
3) AMX: $$, $V,$P,$S,$A,$R formats support are added;
4) AMX: The work with borders is revised;
5) AMX: A queue of display support is added - Free Show sequence (in older version only one sequence – Fill, Image, Icon, Text);
6) ALL: Extended font support (all fonts is available);
7) ALL: Work with sound is added;
8) ALL: The speed of the work for Windows mobile version became much better;
9) ALL: Added Driver Shturman D12SS20;
10) ALL: Added Driver Custom HTTP (for the control of the equipment with web-server).

Bug fixed:
1) Fixed a critical error when connecting to the cameras with the dynamic images;
2) Fixed display of elements in XBMC;
3) Fixed a problem reading data from the flow element CLis.
    

Updates:
All features of iPhone version are included (supported full iPad Resolution - 1024x768 pix)
 

Updates:
1) XBMC: change the work function of receiving data of the current track;
2) XBMC: change the work function of receiving data from the current list;
3) XBMC: removed function request and processing the current position of the track;
4) ALL: A Full-screen mode is added in Windows version;
5) iServer + added ability to take the old key;
6) ALL: new iServer.

Bug fixed:
1) Wizard: Fixed error loading fonts IRP Project;
2) XBMC: the error display elements in XBMC;
3) ALL: Fixed bug in moving images when checking the option to request a one-time images.

Updates:
All features of Windows XP version included.
Added support Windows Mobile 6.5
 

Updates:
1) Added support for password at launch iRidium

Bug fixed:
1) EIB: Fixed error when sending a response to a request
2) EIB: repairing the system is fixed connection
    

Updates:

1) Added support for password at launch iRidium
2) HTTPDevice: Added support for BASE64 encryption
3) XBMC are added user, volume, persentage, play list, file name, title, artist, albom, genre
4) Added prototype driver D12SS20

Bug fixed:

1) Fixed a problem reading data from files TP4
2) EIB: Fixed error when sending a response to a request
3) EIB: repairing the system is fixed connection

Updates:
1) Modbus TCP: refinement of the system to update data from the device

Bug fixed:
1) Fixed command-PAGE (if you have already tried to display the resulting page, the page turned off)
2) Added support command @PPX
3) Modbus TCP: Fixed possible loss of data in data
    

Updates:

1) Modbus TCP: refinement of the system to update data from the device

Bug fixed:

1) Fixed command-PAGE (if you have already tried to display the resulting page, the page turned off)
2) Modbus TCP: Fixed possible loss of data in data
 

Updates:
1) Russian language support in iRidium Update Server.
2) Active connections window in iRidium Update Server.
3) Choice between inner and outer connection.
4) Transformation of the data storage system.
5) Transformation of system architecture.
6) Wizard now supports *.aproj files (projects for AXICO 4 comfort).
7) Wizard now supports *.irp files (files for iRidium GUI).
8) Quick and easy launching the project or redirect in the project directory after the conversion is complete.
9) Possibility of adding new devices in TPDesign (iPhone, Windows CE, Windows XP).
10) Support of AXICO (Windows XP, serial interface, AP102 device).
11) Support of ModBus TCP.
12) Displaying of semitransparent elements.
13) Increase of application loading speed.
14) Support of loading images from network (png, jpg, gif, mjpeg).

Bug fixed:
1) String "controller_ip" in config.cfg changed for host.
2) String "controller_port" in config.cfg changed for port.
3) String "security_key" in config.cfg changed for key.
4) String "panel_id" in config.cfg changed for parameters.
5) Fixed the error when reconnect to controller.
6) Fixed the crash error on iPod Touch.
7) Fixed the crash error if the network service is not available.
8) Fixed the error with text failed to be displayed when working with ^TXT and ^UNI command.
    

Updates:
1) Connection status window.
2) New IRR file loading design.
3) Support of serial interfaces.
4) Removed the application blocking if key is not found, now the key in needed for connection to controller.
5) Special free version for the AXICO controllers.
6) Transformation of the data storage system.
7) Transformation of system architecture.
8) Wizard now supports *.aproj files (projects for AXICO 4 comfort).
9) Wizard now supports *.irp files (files for iRidium GUI).
10) Quick and easy launching the project or redirect in the project directory after the conversion is complete.
11) Possibility of adding new devices in TPDesign (iPhone, Windows CE, Windows XP).
12) Support of AXICO (Windows XP, serial interface, AP102 device).
13) Support of ModBus TCP.
14) Displaying of semitransparent elements.
15) Increase of application loading speed.
16) Support of loading images from network (png, jpg, gif, mjpeg).

Bug fixed:
1) String "controller_ip" in config.cfg changed for host.
2) String "controller_port" in config.cfg changed for port.
3) String "security_key" in config.cfg changed for key.
4) String "panel_id" in config.cfg changed for parameters.
5) Fixed the error when reconnect to controller.
6) Fixed the critical error with memory leak.
7) Fixed the error with video buffer.
8) Fixed the error with the application doesn't unload itself from memory when controller is not found.